What is Furniture Plywood?
Furniture plywood is judged by what happens after it leaves the mill. A panel that looked flat on the pallet will telegraph core ridges through white lacquer, open glue lines on a hot press, or drift out of square between cutting and assembly. Huanawood's furniture grade is selected and processed specifically to avoid those three failure modes.
Panels are moisture-conditioned before pressing, hot-pressed under controlled pressure, then calibrated and fine-sanded both sides. The result is a panel that accepts veneer, lacquer or melamine lamination with a predictable glue-line and stays flat through the finishing oven.
Specifications
Standard production range. Sizes, glue types and grades outside this table can be produced to order — tell us the specification your customer requires.
| Panel size | 1220 × 2440 mm |
|---|---|
| Thickness | 3 / 5.2 / 9 / 12 / 15 / 18 / 25 mm |
| Core | Poplar, combi, eucalyptus |
| Face / back | Okoume, bintangor, poplar |
| Glue | MR (E1) / WBP melamine |
| Sanding | Both sides, fine grit (240) |
| Moisture content | 8–12 % |
| Loading | 20GP ≈ 22 m³ · 40HQ ≈ 52 m³ |
Why buyers choose our Furniture Plywood
Flatness that survives finishing
Moisture conditioning before pressing is the step most mills skip. Skipping it is why cheap panels warp after the lacquer oven. Ours are conditioned, so post-finish flatness holds.
No core telegraphing
Fine-grit sanding plus uniform core veneer thickness means the core structure does not shadow through light paint or thin HPL.
Two glue options for two workshop realities
MR (E1) for normal indoor production; WBP melamine for export furniture that ships through humid equatorial routes or sits in coastal warehouses.
Batch consistency
We keep species and press parameters per order, so the container you reorder in six months behaves like the first one.
Applications
Cabinets and wardrobes
12–18 mm carcass panels; 3–5.2 mm backs and drawer bottoms.
Table and desk tops
18–25 mm panels for laminated or veneered tops.
Bed frames and headboards
Strong, light frames that hold bolts without splitting.
Interior panelling
Painted or paper-faced panels for bedrooms and hotel fit-outs.
Office furniture
Workstations, storage walls and credenzas.
Packing & container loading
| Container | Volume | Details |
|---|---|---|
| 20GP | ≈ 22 m³ | About 750 sheets of 15 mm |
| 40HQ | ≈ 52 m³ | About 1,800 sheets of 15 mm |
| Pallet | Face-protected pallets | Interleaved sheets, corner protectors |
All shipments are palletised, steel strapped and wrapped in waterproof film. Loading photographs and a full document set are sent for every container.
Frequently asked questions
What is the difference between furniture plywood and commercial plywood?
Which core is best for lacquered wardrobes?
Can the panel be supplied pre-sanded to 240 grit only?
Do you test bonding strength?
What is the lead time for a mixed-thickness container?
Need a price for Furniture Plywood?
Tell us the specification and destination port. Formal offer within 24 hours, samples available on request.
